BPC PowerMaster Manual do Proprietário descarregar pdf (Página 19)

Programming your QSI

/M.T.H.

Proto-Sound

1.0 locomotive

he LEGACY PowerMaster allows you to program your QSI

/M.T.H.

Proto-Sound

1.0

locomotives with ease, bringing some of the Proto-Sound® features under your control

while operating in conventional mode. Follow these steps and refer to your locomotive’s

instructions for information about your engine’s features.

1. Press AUX1, 0 on the CAB Remote. Be sure to wait for the sounds to stop completely. This

will reset the engine by completely removing power.

2. Press AUX1, 9 on the CAB Remote. Track voltage goes to full.

3. Press 5 repeatedly on the numeric keypad until the desired feature is activated. A

programming pulse is sent through the track to program the QSI

/M.T.H.

Proto-

Sound

1.0 units.

Do not press the AUX1 button on your CAB Remote between pressing 9 and 5.

4. Press the WHISTLE button on the CAB Remote to program that feature. Consult your

M.T.H.

engine operating instructions for specific details.

Operating M.T.H.

Proto-Sound

2.0 features with the LEGACY

PowerMaster unit

he LEGACY PowerMaster allows you to operate M.T.H.

Proto-Sound

2.0 locomotives

in conventional mode. At the press of a few buttons, your favorite conventional Proto-

Sound

2.0 features—like speed control and coupler operation—are at your command.

All M.T.H.

Proto-Sound

2.0 features can be accessed in conventional mode.

Refer to the next section for additional information.

Note!

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

BPC PowerMaster Manual do Proprietário Página 19