BPC PowerMaster Manual do Proprietário descarregar pdf (Página 13)

Configuring Your BPC2

he illustration below shows the name and location of each switch, connector and indicator

light on your LCS BPC2 module. The function of each is described on following pages.

A – Track Power Block terminals should be connected to electrically-isolated

track power blocks.

B – Label for the track power block screw terminals.

C – LCS PDI cable inputs. Use either connector.

D – Red LCS PDI activity indicator.

E – Program switch used to set the BPC2’s TMCC ID base address.

F – Relay Power terminals

Figure 8. BPC2 call outs.

There are three additional steps required to use your BPC2. They are:

1. Connect an accessory transformer to the Relay Power Terminals.

LCS PDI CABLES

use either connector

AC PowerPROGRAM

A U A U

BPC2

BLOCK BLOCK

COMM

8 7 6 5 4 3 2 1

6-81640

C D E F

2. Set the BPC2’s configuration.

3. Wire your track power blocks to the BPC2.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

BPC PowerMaster Manual do Proprietário Página 13